Product:
Category
Sub-Category
For more information, click on this icon:
This oven has been specifically designed for the softening of thermoplastic sheet materials prior to draping over vacuum-forming mold. The oven air temperature is accurately controlled by a digital indicating controller. An internal light and a window in the door allows state of the material to be easily observed. The oven has a single side hinged door and a pair of shelf runners near the top of the chamber to accept the user’s frame which clamps the material. The oven is designed for bench mounting, but stands are available at an additional cost. Temperature: • Normal Working Temperature Range 50°C - 300°C • Maximum Operating Temperature 300°C • Temperature Stability is better than ±1°C under steady state conditions • Temperature Uniformity is better than ±5°C • Temperature Sensor Type “K” Mineral insulated thermocouple Dimensions: • Interior Chamber, 28.5” (720mm) high x 24” (610mm) wide x 19” (480mm) deep • Approximate External, 34.25” (870mm) high x 37” (940mm) wide x 24” (610mm) deep Controls: • Temperature Controller has both a highly accurate self-tuning feature and ramp-to-setpoint capability. A large bright green digital LED will display either the setpoint or process temperature. The controller push buttons and digital display are mounted behind, but integrally incorporated in the design of an attractive wipe clean polyester membrane. Temperature may be displayed in degrees C or F. • Power Control, Thyristor based solid state relay working in the fast cycle zero voltage switching model